国产免费三级在线现看

<dd id="m9499"></dd>
<tbody id="m9499"><noscript id="m9499"></noscript></tbody>

  • <dd id="m9499"><track id="m9499"></track></dd><tbody id="m9499"></tbody>
        <th id="m9499"><pre id="m9499"></pre></th>

        <button id="m9499"><object id="m9499"></object></button>

        Raw Material Analysis for Brick Machine

        Shuangyashan Oriental Wall Material Group Co., Ltd was established in 1968 and engaged in supplying whole set of fired brick making machine from raw material preparation, extruder, cutter, brick setting machine, to kiln cars running system.

        After more than 40 years development and innovation, now it can serve customers with full service and is capable of ensuring the success of customers. Raw material of bricks can be clay, gangue, fly ash and shale.
         
        There are two kinds of raw material for brick making: clay and sand. The samples of them provided by buyer after testing in China have already been proved to be
        suitable for making bricks. Detailed raw material test report see Annex 9.

        Annex 9. Brief Raw Material Test Report
         
        1. Chemical Analysis of Brick Machine Raw Material

        Raw Material

        SiO2

        Fe2O3

        Al2O3

        CaO

        MgO

        Loss on ignition

        1# Plastic Clay

        60.73

        8.80

        14.00

        2.30

        4.00

        6.68

        2# River Mud

        66.84

        5.78

        9.38

        3.70

        2.41

        5.61










        2.Physical Analysis of Brick  Machine Raw Material

        Raw
        Material

        Liquid Limit

        Plastic
        Limit

        Plastic
        Index

        Universal Moisture

        Drying Performance

        Coefficient of Drying
         Sensitivity

        Critical Moisture Content

        Linear Shrinkage

        1# Plastic Clay

        35.7

        24.4

        11.3

        31.24

        0.74

        18.0

        4.66

        2# River Mud

        31.0

        22.2

        8.8

        27.29

        0.52

        17.9

        3.38














        Final Analysis Conclusion of Brick Machine Raw Material:

        1. The molding performance is strongly influenced by the plasticity of raw material. From the above date in the table, the index of 2 types of clay plasticity is more than 7 but less than 15, therefore it is the middle plasticity raw material of brick machine and suitable for making bricks.

        2. For the drying performance, the coefficient of drying sensitivity is less than 1, which means it is the low sensitivity material. When drying, it will be not easy to show cracks and allow the fast drying method.

        Shuangyashan Oriental Wall Material Group Co., Ltd has the all inclusive system to serve customers from project consultation, plant design, technology, equipment, tunnel construction, installation, debugging and training. With the comprehensive and thoughtful service, we supply customers with a set of management mode to ensure the users’ success. Shuangyashan had built more than 620 production lines at home and overseas such as in Russia, Bangladesh, Angola, Saudi Arabia, Peru, India, and Kazakhstan. Welcome to enquiry!

        Homepage/ http://www.atharonmod.com
        E-mail/ sysdf@sysdf.com

        Email Us(*)Required information

        国产免费三级在线现看
        <dd id="m9499"></dd>
        <tbody id="m9499"><noscript id="m9499"></noscript></tbody>

      1. <dd id="m9499"><track id="m9499"></track></dd><tbody id="m9499"></tbody>
            <th id="m9499"><pre id="m9499"></pre></th>

            <button id="m9499"><object id="m9499"></object></button>